| FOUR EASY STEPS TO TOTAL FLOOR CARE |
| FLOOR TYPE | WOOD, MARBLE, LINOLEUM |
Step 1
CLEAN |
Neutral Cleaner
- Dilute the Neutral Cleaner in the tank following the instructions on the bottle.
- Use the Cleaning Machine with tan cleaning pads.
- If the floor is very dirty use the green scrubbing pads.
- Mop and let dry
- Follow with Step 2
|
| Step 2 |
Polish
- Use the Cleaning Machine with dry tan pads on our dry scrubing pads.
- Continue with Step 3
|
| Step 3 |
Buff
- Apply two coats of the High Gloss Protective Floor Finish.
- Between waxings use the Cleaning Machine with lambswool pads to maintain a high gloss finish.
|
Step 4
TOUCH UPS |
Touch Ups
- To remove scuff marks from the floor's finish, use the Cleaning Machine with dry tan pads.
- If the floor is very dirty, use the Cleaning Machine as described in Step 1.
|
| FLOOR TYPE | CARPETING AND RUGS |
Step 1
CLEAN |
Shampoo
- Dilute Dry Foam Shampoo in the machine tank following the instructions on the bottle.
- Use the Cleaning Machine with soft white bristle carpet brushes.
- Use the trigger mechanism to dispense the right amount of shampoo sparingly until you see a white foam on the carpet.
- Guide the Cleaning Machine with forward and backward movements.
|
| Step 2 |
Let Dry
- After shampooing let dry about 3-4 hours, but preferably overnight.
|
| Step 3 |
Vacuum
- Vacuum crystalized dirt debris.
|
Step 4
TOUCH UPS |
Touch Ups
- Use the Cleaning Machine with the Dry Foam Rug Shampoo to remove spots and maintain high traffic areas without the need to shampoo the entire carpet.
- To remove difficult stains, use the Koblenz Carpet Spotter before shampooing. If you have heavy grease-based stains, use the Cleaning Machine
with the Heavy Duty Cleaner. Follow with the Dry Foam Rug Shampoo.
|
| FLOOR TYPE | CERAMIC TILE, GROUT, VINYL, & CONCRETE |
Step 1
CLEAN |
Heavy Duty Cleaner*
- Dilute the Heavy Duty Cleaner in the tank following the instructions on the bottle.
- Use the Cleaning Machine with the natural bristle brushes or green scrubbing pads.
- Mop and let dry
- Follow with Step 2
|
| Step 2 |
Polish
- Use the Cleaning Machine with dry tan pads to obtain a high gloss shine follow with Step 3
|
| Step 3 |
Buff
- Apply two coats of High Gloss Protective Floor Finish with a sponge. Buff with felt pads.
- Between waxings, use the Cleaning Machine with felt buffing pads to renew the shine.
|
Step 4
TOUCH UPS |
Touch Ups
- To remove the scuff marks, use the Cleaning Machine with dry tan pads, these will remove marks without dulling the finish.
- If the floor is very dirty, use the Cleaning Machine as described in Step 1.
|
|
* NOTE: Scrubbing brushes are recommended for textured surfaces and grout, green pads are recommended for smooth surfaces. |
